SSDs in servers deliver performance, whether measured in IOPS or GBps or latency, that is just plain impossible with disks. SSD capacity is now greater than that of performance disks. Price is the factor that still keeps many organizations away from deploying servers with SSD storage when the improved performance is not a significant benefit. The better reliability of SSD might be more important. Continue reading SSD vs HDD RAID in Servers and Storage→
Most “server” deployments deserve a rich, robust server platform with redundant power, redundant cooling, redundant storage, multiple network paths and error-correcting memory, but many servers already have redundant applications and redundant data. In some of these deployments it then becomes reasonable to consider a small, cool, low-power alternative approach with redundant storage and two network interfaces for redundant communications. ion calls that a miniSERVER. Continue reading ion miniSERVER→
For years, ion has reported usable capacity of disk and SSD storage in GiB and TiB instead of GB and TB. Why? And what’s the difference? Basically, 1 GB = 1,000,000,000 bytes while 1 GiB = 1,073,741,824 bytes. That is about 7%! Look at ion‘s SR-71mach6 SpeedServer or PS StorageServer for examples of capacity reporting. You can learn more about the differences in the Continue reading Storage Capacity: TB vs TiB→
Servers based on Intel® Xeon® Scalable Processors, the proccesor architecture known as “Skylake”, have arrived! ion is producing 1U and 2U rackmount servers along with pedestal/4U servers and high density half-U compute nodes. These servers feature much improved capability for NVMe SSDs and significantly higher memory bandwidth, along with options for more cores and higher clock speeds. Intel® Xeon® Scalable Processors include a number Continue reading ion P-series Servers with Intel Xeon Scalable Processors→
ION® Computer Systems, Inc. recently published benchmark results for its SR-71mach5 SpeedServer™ running Microsoft® Windows® Server 2012 R2 with the SMB 3.1 protocol. Yes, the performance is “Disk-Impossible!”. A single 2U “mach5” system costing under $80k served 64kB random reads at 10 Gigabytes per second and delivered 8kB random reads at 1 million Input/Output Operations per second. Average latency as low as 1ms was Continue reading Disk-Impossible File Server→
The impact of SSDs on I/O related performance in a server is dramatic. Unleashed from the mechanical limitations of spinning disks, a single server can perform 10s or 100s of thousands of I/O Operations per second, IOPS, instead of just a few thousand. Without long I/O waits, processor, RAM and RAID controllers can all get much busier, but the impact on humbler pieces of Continue reading SSD Performance has System-wide Effects→
The title of this series of posts is “Spinning Rust is Dead”. Well, actually it is “Spinning Rust is (almost) Dead”. Why, given all of the facts, do I say “almost“? Disks are really good at one thing: storing a LOT of data. So for backup, archival, or storing many terabytes of data that gets accessed only occasionally, disks are good. Data centers should Continue reading Spinning Rust is (almost) Dead, Part 5, Almost?→
“But wait,” you say, “price and performance aren’t everything!” Really? You are correct. Reliability counts when your data is sitting on the drive. To start with, think about microscopic magnetic heads flying back and forth over platters spinning at 7,200 rpm to 15,000 rpm. Need I say more? We can compare manufacturer’s MTBF (Mean Time Between Failure) numbers, but nobody really knows how they Continue reading Spinning Rust is (almost) Dead, Part 4, SSD Power and Reliability→
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.